Graco Inc. 287713 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Stříkací barva Graco Inc. 287713. Graco Inc. 287713 User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
311082B
Instructions
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Pressure Roller with
20-inch Fixed Extension
- For application of architectural paints and coatings -
Model 287713, Series A
20 inch (50 cm) heavy-duty extension
9 inch (23 cm) roller frame
1/2 inch (13 mm) nap roller cover
3600 psi (24.8 MPa, 248 bar) Maximum Working
Pressure*
*The best operating pressure is the lowest pressure that
provides an even paint supply to the roller and typically
does not exceed 300 psi (2.1 MPa, 21 bar).
CAUTION
Never leave water in pump, gun or pressure roller.
Doing so could cause corrosion and damage from
freezing. For storage, flush the system with Pump
Defender
or mineral spirits/paint thinner.
WLD
Zobrazit stránku 0
1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - 20-inch Fixed Extension

311082BInstructionsImportant Safety InstructionsRead all warnings and instructions in this manual. Save these instructions.Pressure Roller with20-inch

Strany 2 - Warnings

Warnings 2 311082BWarningsThe following warnings are for the safe setup, use, grounding, maintenance, and repair of this equipment. The excla-mation p

Strany 3 - TIAB

Pressure Relief Procedure311082B 3Pressure Relief Procedure1. Turn power switch OFF and unplug sprayer power cord. 2. Turn spray/prime valve to PRIME

Strany 4 - Cleaning

Cleaning 4 311082BCleaningThis is the procedure for flushing/cleaning the pressureroller. The sprayer and gun you are using may have ad-ditional flush

Strany 5 - 311082B 5

Parts311082B 5Parts▲Replacement Danger and Warning labels, tags, and cards are available at no cost.Ref. No. Part No. Description Qty.1 15B052 FRAME,

Strany 6 - PRINTED IN U.S.A. 311082

ASM Standard Warranty 6 311082BASM Standard Warranty ASM warrants all equipment referenced in this document which is manufactured by ASM and bearing i

Komentáře k této Příručce

Žádné komentáře